Network Device Maintenance and Diagnostics

Replacing or adding voice processing boards Standard 1.10
176 CallPilot
3 Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
4 Remove the chassis cover. Refer to “Removing and replacing the
server cover” on page 108 for instructions.
5 Disconnect the red power cable from the PCI riser assembly.
6 Disconnect the DS30X cable from the MPB96 card in the full-size
side of the PCI riser. Mark the cable as number 1.
7 Disconnect the SCSI cable attached to the RAID card.
Figure 51: SCSI cable attached to RAID card
8 Lift the blue tabs and pull up on the riser to remove the riser card
assembly from the chassis.