Network Device Maintenance and Diagnostics
June 2007 RAID operations
1005r Server Maintenance and Diagnostics 139
Verifying the RAID firmware
You require the following minimum RAID firmware version:
1L37
To verify the RAID firmware version
To determine what the current RAID firmware version is on the RAID
LSI320-1 controller, use either of the following procedures:
Press Ctrl+M
1 Turn on the server and press Ctrl+M when prompted during system
bootup.
Note: The Ctrl+M utility can take up to 1 minute to launch with 1L37
firmware. The system can appear frozen. Do not reset.
2 Select Objects menu
➝ Adapter ➝ Other Adapter Information.
3 Review the information on the screen. The LSI320-1 controller
firmware must be 1L37.
Launch MegaRAID Power Console Plus
1 Launch the MegaRAID client by clicking Start > Programs> Power
Console Plus > Launch Client.
2 From the MegaRAID Power Console Plus - Server Selection
window, select Access Mode > Full Access to view or change
configuration information and click OK.
3 From the MegaRAID console, choose Adapter > Properties.
4 Review the information on the screen. The LSI320-1 controller
firmware must be 1L37.