Network Device Maintenance and Diagnostics

Replacing basic chassis components Standard 1.10
110 CallPilot
Removing and replacing the processor air
duct
You must remove the air duct to access the processor assembly, four-fan
assembly, and the memory modules. Because the processor air duct
channels the airflow within the chassis, be sure to reinstall the air duct
before installing the chassis cover.
Requirements
You need a Phillips (cross head) screwdriver, #1 and #2 bit.
To remove the processor air duct
1 Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power.
2 Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
3 Remove the chassis cover. Refer to “Removing and replacing the
server cover” on page 108.
4 Remove the screws at the top of the air duct.