User's Manual

Convert IP Trunk Cards to Voice Gateway Media Cards Page 843 of 910
IP Line Description, Installation and Maintenance
If Package 167 is restricted, obtain a new keycode to enable GPRI
Package 167.
In LD 73, enter DDB at the TYPE prompt and press <CR> through
the overlay, accepting all the defaults.
End of Procedure
Import all converted Voice Gateway Media Cards into a new
IP Telephony node
Follow the steps in Procedure 123 to import all newly-converted Voice
Gateway Media Cards into a new IP Telephony node using Element Manager.
Procedure 123
Importing all converted Voice Gateway Media Cards into a new IP
Telephony node
1 Log into Element Manager from the web browser by entering the
IP address of the Signaling Server.
2 Enter the User ID and password (usually the same as the Call Server
User ID and password).
3 When logged into Element Manager, click IP Telephony > Nodes:
Servers, Media Cards > Configuration.
The Node Configuration window opens. See Figure 271 on page 844.