User's Manual

Voice Gateway Media Card maintenance using OTM 2.2 Page 815 of 910
IP Line Description, Installation and Maintenance
Retrieve IP Line configuration from the IP Telephony node
Procedure 117 is an optional procedure that can be used in the following
cases:
• when adding an IP Telephony node on OTM by retrieving an existing
node
• when there is a possibility that the IP Telephony node configuration on
the Voice Gateway Media Card differs from the OTM IP Telephony
database (for example, during maintenance and fault isolation
procedures)
• when there are multiple OTM IP Line PCs with multiple instances of the
database (administration)
Use the OTM IP Line Configuration > Synchronize > Retrieve command
to retrieve the IP Line configuration information from the IP Telephony node
as described in Procedure 117.
Procedure 117
Retrieving IP Line configuration data from the IP Telephony node
1 In the OTM Navigator, select the Services folder and then double-click
on the IP Telephony icon. The IP Telephony window opens.
2 Select Leader 0 or any card from the node.
3 In the IP Telephony window, click Configuration > Synchronize >
Retrieve.
The Retrieve Options window opens.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.