User's Manual

Voice Gateway Media Card maintenance using OTM 2.2 Page 807 of 910
IP Line Description, Installation and Maintenance
d. Verify that the IP Phone firmware version is the latest recommended
release of firmware. Click OK.
4 If the card’s software and firmware are not up-to-date, transfer the
downloaded files (*.p2, *.sa, and firmware file(s)) from an
Internet-enabled PC to the OTM PC.
5 Upgrade the software and/or firmware, if required. Refer to “Upgrading
Voice Gateway Media Card software from the OTM 2.2 PC” on page 512
and “Upgrading the IP Phone firmware” on page 517.
End of Procedure
Transmit card properties to the cards
To transmit card properties to the Voice Gateway Media Cards, follow the
steps in Procedure 115 on page 807.
Procedure 115
Transmitting card properties
1 In the OTM Navigator, select the Services folder. Double-click on the IP
Telephony icon. The IP Telephony window opens.
2 Select the replacement Voice Gateway Media Card.
3 Click Configuration > Synchronize > Transmit.
The Transmit Options window opens. See Figure 244.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.