User's Manual

Voice Gateway Media Card maintenance Page 765 of 910
IP Line Description, Installation and Maintenance
However, if the software version is prior to version 4.5, enter the following
commands:
xaSend 0,0x11
W 05555,AA
W 02AAA,55
W 05555,80
W 05555,AA
W 02AAA,55
W 05555,30
Note 1: There is a space after xaSend and the letter “W”. No other
spaces are allowed. All letters are in uppercase.
Note 2: Ignore any syntax error messages that print out after the xaSend
command is entered.
After the last command is entered, the card automatically reboots.
4 When the card boots up with firmware version x.x, the following messages
are printed:
ITG Firmware Rls x.x
8051XA Firmware Version x.x (Pentium) <date>
(C) Nortel Networks Inc., 1996-2004
32K External RAM detected
All FPGAs are configured
No dongle detected
8K DPRAM detected
Bank 0 Checksum - 54A9H
....
End of Procedure