User's Manual

IP Line administration using OTM 2.2 Page 673 of 910
IP Line Description, Installation and Maintenance
Update Voice Gateway Media Card card properties
Some basic Voice Gateway Media Card configuration must be performed
from the Node Properties window. To update the card properties in the DSP
Profile, follow the steps in Procedure 99.
Procedure 99
Updating card properties – DSP Profile tab
1 In the OTM Navigator window, click the Services folder. Double-click the
IP Telephony icon.
The IP Telephony window opens.
2 Click Configuration > Node > Properties.
3 Click the DSP Profile tab.
The DSP Options sub-tab appears.
See Figure 228 on page 674.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.