User's Manual

Page 672 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005
Restart all Voice Gateway Media Cards
All Voice Gateway Media Cards cards have to be restarted if there has been
a change to one of the following:
• node IP address – these changes affect the whole node and, as a result, all
cards must be restarted
• network interface of either the TLAN or ELAN (by changing the subnet
mask or the fields of the IP address) – if the Management (ELAN)
network interface IP address of Leader 0 has changed, all cards have to
be restarted. Even though this is a change to a single card, this change
affects all cards, as OTM uses this address to transmit properties to the
node.
Follow the steps in Procedure 98 to restart all the Voice Gateway Media
Cards.
Procedure 98
Restarting all the Voice Gateway Media Cards
1 Telnet to the card from OTM.
2 Use the setLeader command to set the new IP address.
Leader 0 uses this new IP address when it reboots.
3 Reboot the Leader 0 using the cardReset command.
The Leader 0 card reads the new IP address from NVRAM.
4 Restart all the other cards.
End of Procedure