User's Manual

Page 612 of 910 IP Line administration using Element Manager
553-3001-365 Standard 4.00 August 2005
h. Click ADD to enter the IP address for another trap destination.
Add destination SNMP Manager IP addresses for the following:
• local or remote OTM server
• PPP IP address configured in the router on the ELAN subnet
for the remote-support OTM PC
• SNMP manager for remote alarm monitoring.
Note 1: Up to eight SNMP trap destinations can be defined.
Note 2: A net route or host route through the Management (ELAN)
gateway is added to the Voice Gateway Media Cards IP Routing Table for
each SNMP management address that is added to the SNMP traps list.
To remove an SNMP trap destination, click the corresponding Remove
button
Changes can be made to the SNMP trap destinations without affecting
other IP addresses. Change the SNMP trap destinations as required,
based on the trap destination to be reached.
8 Expand the LAN Configuration section.
See Figure 202.
Figure 202
LAN configuration