User's Manual

Configuration of IP Telephony nodes using OTM 2.2 Page 499 of 910
IP Line Description, Installation and Maintenance
9 From the OTM IP Telephony Gateway - IP Line 4.5 application, select
View > Refresh to show the card status. Otherwise, verify LAN
connections and IP configuration.
End of Procedure
Transmit node and card properties to Leader 0
To transmit the node and card properties to Leader 0, follow the steps in
Procedure 62.
Procedure 62
Transmitting node and card properties to Leader 0
1 Log into LD 32 on the system. Disable the card in order to transmit the
card properties.
2 Open OTM. From the OTM Navigator window, click on the Services
folder to expand the menu. Double-click on IP Line 4.5. The IP
Telephony Gateway - IP Line 4.5 window opens.
3 From the list of IP Telephony nodes in the upper part of the window, select
the node to which configuration data is to be transmitted.
4 Select Configuration > Synchronize > Transmit.
The Transmit Options window appears. See Figure 162 on page 500.
CAUTION
OTM 2.2 does not support transmitting node and/or card
properties to a node (or any of the card within the node)
which resides on a CS 1000 system.