User's Manual

Configuration of IP Telephony nodes using Element Manager Page 405 of 910
IP Line Description, Installation and Maintenance
12 If the card role is not correct, verify LAN connections and IP configuration.
End of Procedure
Transmit node properties
To transmit the node properties to the Leader, follow the steps in
Procedure 37 on page 405.
Procedure 37
Transmitting node properties to Leader
1 If changes are made to the node or card configuration data, ensure the
data is saved to the Call Server by clicking the Save and Transfer button
in the Edit window.
A confirmation dialog box opens. See Figure 102.
Figure 102
Confirm Submit
2 Click OK to confirm the save of the node data.
The Edit window closes, and the Node Configuration window opens.
3 In the Node Configuration window, click the Transfer/Status button
associated with the node.
The Transfer/Status window opens. See Figure 103 on page 406.