User's Manual

Installation and initial configuration of an IP Telephony node Page 343 of 910
IP Line Description, Installation and Maintenance
Using Element Manager for Voice Gateway channels
Alternatively, for CS 1000 systems, configure the Voice Gateway channels
using Element Manager instead of using LD 14.
To use Element Manager to configure Voice Gateway channels, follow the
steps in Procedure 22.
Procedure 22
Using Element Manager to configure Voice Gateway channels
1 Launch and log into Element Manager. See Procedure 25 on page 367
for details.
2 In the navigator, click IP Telephony > Nodes: Servers, Media Cards >
Configuration.
The Node Configuration window opens. See Figure 72.
Figure 72
Node Configuration window
3 Expand a node by clicking the plus sign (+) to the left of the node.