Media Bay Module Installation Guide and Configuration Gui

60 Chapter 5 Configuring the R2MFC MBM
NN40010-300
The routes configured on the BCM are listed below the Routes heading.
6 Select the route that is to be configured under the Routes heading. See Figure 26 on page 60.
The Route # information frame displays.
7 Select Overlap from the Service type drop-down list.
8 Repeat Steps 6 and 7 for every active B-channel that is provisioned for the corresponding E1.
There will be 30 channels, unless a partial E1 service is arranged with the CO.
See Figure 26 on page 60 for an example of the screen layout for configuring the outgoing
dialing parameters for second dial tone on the R2MFC MBM.
Figure 26 Outgoing dialing configuration for second dial tone