Media Bay Module Installation Guide and Configuration Gui

16 Chapter 1 Getting started
NN40010-300NN40010-300
Before you begin
This guide assumes the following:
• The host system is installed and initialized and is working correctly.
• The host system is running BCM 2.5 FP 1, or greater.
• Users have a working knowledge of the host system operations.
• All configuration installers have a working knowledge of the Windows operating system and
graphical user interfaces.
Acronyms
The following is a list of acronyms used in this guide.
Table 1 Acronyms
Acronym Description
AIS Alarm Indication Signal
ANI Automatic Number Identification
BCM Business Communication Manager
BPV Bipolar Violations
CLI Command Line Interface
CLID Calling Line Identification
CO Central Office
CRC4 Cyclic Redundancy Check 4
CSU Channel Service Unit
DCH D-Channel Handler
DTMF Dual Tone Multi-Frequency
EEPROM Electrically Erasable Prorammable Read Only Memory
ETSI European Telecommunications Standards Institute
FBER Frame Bit Error
FEBE Far End Block Error
ISDN Integrated Services Digital Network
LFA Loss of Frame Alignment
LMA Loss of Multiframe Alignment
LOS Loss of Signal
MBM Media Bay Module
MFC Multi-Frequency Compelled
MSC Media Services Card
OOF Out-of-Frame