Media Bay Module Installation Guide and Configuration Gui

Configuring DIP switch settings and definitions 107
R2MFC Media Bay Module Installation and Configuration Guide
Panama Config 1
Panama is a supported country configuration. You select Panama by setting the Country Selection
DIP switches to custom and configuring the settings manually through the CLI.
Table 45 Interpretation of transmitted MFC signals
Meaning Signal Meaning Signal Meaning Signal
BW_NextDig A_1 FW_ReqFault I_12 FW_Categ_1 II_1
BW_BCateg A_3 FW_EndDigits I_15 FW_Categ_2 II_2
BW_RtrnToA A_1 FW_EndANIdgts I_15 FW_Categ_3 II_3
BW_A_Congest A_4 FW_Digit_1 I_1 FW_Categ_4 II_4
BW_B_Congest B_4 FW_Digit_2 I_2 FW_Categ_5 II_5
BW_Category A_5 FW_Digit_3 I_3 FW_Categ_6 II_6
BW_SpeechChrg A_6 FW_Digit_4 I_4 FW_Categ_7 II_7
BW_OrigDn A_5 FW_Digit_5 I_5 FW_Categ_8 II_8
BW_FreeCharge B_6 FW_Digit_6 I_6 FW_Categ_9 II_9
BW_FreeNoChrg B_7 FW_Digit_7 I_7 FW_Categ_10 II_10
BW_CntrCharge NO_SG FW_Digit_8 I_8 FW_Categ_11 II_11
BW_Busy B_3 FW_Digit_9 I_9 FW_Categ_12 II_12
BW_Unlocated B_5 FW_Digit_10 I_10 FW_Categ_13 II_13
BW_OutOfOrder B_8 FW_Digit_11 I_11 FW_Categ_14 II_14
BW_ChangOrder B_2 FW_Digit_12 I_12 FW_Categ_15 II_15
FW_Digit_13 I_13 FW_KD_Local II_3
FW_Digit_14 I_14 FW_KD_LnDst II_2
FW_Digit_15 I_15