Media Bay Module Installation Guide and Configuration Gui

Configuring DIP switch settings and definitions 105

R2MFC Media Bay Module Installation and Configuration Guide

Chile Config 1

E1 Physical Characteristics

• Connector type: BNC

• Line coding: HDB3

E1 Framing

Frame mode: Alternate

• Regret option: OFF

• End of dialing (Incoming): terminated by indication from destination switch, or by MFC

forward signal FW_EndDigits

• End of dialing (Outgoing): terminated by indication from destination switch, or by MFC

forward signal FW_EndDigits

R2 line signaling

Chile Config 1 R2 signals are according to CCITT standard. See Table 28 for the Chile Config 1

R2 signal definitions.

BW_OutOfOrder B_8 FW_Digit_13 I_13 FW_Categ_15 II_15

BW_ChangOrder B_4 FW_Digit_14 I_14 FW_KD_Local II_3

FW_ReqFault I_12 FW_Digit_15 I_15 FW_KD_LnDst II_2

FW_EndDigits I_15 FW_Categ_1 II_1

Table 43 Chile Config 1 R2 A/B signals

Forward Backward

SignalABSignalAB

Idle 1 0 Idle 1 0

Seize 0 0 Seize acknowledge 1 1

Clear forward 1 0 Answer 0 1

Clear back 1 1

Table 42 Interpretation of transmitted MFC signals (Sheet 2 of 2)

Meaning Signal Meaning Signal Meaning Signal