User's Manual

Fault management 23

Nortel Networks Confidential

2 If the alarm persists, the number of available ports per blade

(card) and/or the number of blades (cards) in the system must

be increased. To increase the number of ports or the number of

blades, contact your next level of support.

Clearing the RTP105 Alarm (Private Port Usage)

1 Wait for at least two audit cycles to see if the alarm is cleared

automatically. An audit cycle has a duration defined by the “Idle

Session Audit Period” property.

2 If the alarm persists, the number of available ports per blade

(card) and/or the number of blades (cards) in the system must

be increased. The recommended maximum ports per blade is

300.

3 If it is not possible to increase the number of ports or the number

of blades, contact your next level of support.

Logs

System logs are discussed in detail in the MCP Management Module

Basics.