Part No.
Copyright © 2002 Nortel Networks All rights reserved. April 2002. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks Inc.
Symbol NetVision Telephone feature overview LED call indicator Speaker Headset jack FCT − displays feature menu MENU − displays user options Volume buttons MENU FCT RCL NAME NAME − displays list of user names RCL − recalls dialed numbers 1 SND SND − turns on phone END END − turns off phone, ends call 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ < 0 OPR # > Phone keypad STO − stores data in phone CLR − clears individual digits CLR STO HOLD HOLD key* Microphone *
Overview The Symbol* wireless handset is a Voice-over-IP (VoIP) portable telephone that provides on-site wireless voice communication capability. The handset works with the Nortel Networks Meridian 1 ITG Line Card. The Symbol handset converts analog voice into compressed digital packets that are sent by TCP/IP protocol (supports IEEE 802.11 protocols) over standard data networks. For information on the features of the Symbol wireless handset, refer to the Symbol NetVision* telephone User Guide.
Logging out 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display Logout. 3 Press the SND key. This action will remove the handset from the list of managed endpoints on the system and calls will no longer be directed to the handset. Note: If DHCP is being used to dynamically allocate IP addresses to the handsets, a logout is required before a new IP address can be assigned by the DHCP server. See your administrator for details. Logging in 1 Press the FCT key.
Making a call Following a successful login, 1 Use the dial pad to enter the digits. The digits are displayed on the handset as they are entered. 2 Press the SND key. Note: Alternatively, you may use the NAME key to display a list of numbers that have been provisioned on your system, or use the RCL key to display a list of Speed dial numbers or recently dialed numbers. See the NetVision Phone Quick Reference Guide for details on the operation of these features.
Meridian 1 features The Symbol NetVision telephones provide access to many of the most popular Meridian 1* features. All of the features described in this guide must be configured for your telephone by your administrator. These features are only available if provisioned on the Meridian 1 or Succession CSE 1000 system. A feature that has not been provisioned may appear on your telephone, but will cause no operational change. Transfer Use the Transfer feature to redirect a call to a third party.
Conference You can set up a conference call for up to six people, including yourself. Contact your administrator to determine the maximum number of people your Meridian 1 system allows on a conference call. To set up a conference call: 1 Press the FCT key while you are on a call. 2 Use the scroll keys (*<, >#) or the Volume buttons to display Conference. 3 Press the SND key. 4 Use the keypad to enter the telephone number of the person that you want to add to the call.
Make Set Busy The Make Set Busy feature causes your telephone to appear busy to all incoming calls, and, if configured by your administrator, directs incoming calls to your voice mailbox. You can activate this feature while you are on a call, and your telephone will enter busy state once you end the call. Note: The Call Forward feature takes precedence over this feature. To activate Make Set Busy: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display SetBusy.
Call Forward The Call Forward feature allows you to direct your calls to ring at another extension. You cannot forward calls while your telephone is ringing. To activate Call Forward: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display CallFwd. 3 Press the SND key. 4 Use the keypad to enter the telephone number were you want to forward your calls.
Call Park The Call Park feature allows a call to be held temporarily and to be retrieved from any telephone. You can park an incoming call and page the called party. When you use Call Park, you do not tie up your extension. To park a telephone call: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display CallPark. 3 Press the SND key. 4 Use the keypad to enter the telephone number where you want to park the call.
Ring Again Use the Ring Again feature when you dial an extension and receive a busy tone or no answer. The Ring Again feature notifies you when the person you dialed has ended their call or when they have used their telephone. To activate Ring Again: 1 Without ending the call, press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display RingAgain. 3 Press the SND key.
System Speed Call The System Speed Call feature allows you to make a call by dialing Speed Call codes which may override your telephone’s class of service restrictions. The System Speed Call feature is set up on the Meridian 1 system by your administrator. It is a speed dial number that is common to many users; therefore, it is stored on the system and not on your individual telephone To use System Speed Call: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display SpeedCall.
Group Call The Group Call feature automatically calls members of a predefined group, one at a time, until they all have answered. Ask your administrator for details on how to create a conference call group. To place a Group Call: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display GroupCall. 3 Press the SND key. The Meridian 1 system immediately originates calls to all of the numbers in the group. When the first member of the group answers, the ring back tone stops.
Call Pickup The Call Pickup feature allows you to pick up a call that is ringing at another extension in your pickup group. To pick up a call: 1 Press the FCT key. 2 Use the scroll keys (*<, >#) or the Volume buttons to display CallPickup. 3 Press the SND key. The incoming call is routed to your extension.
Retrieve voice mail messages Your telephone provides you with an indication that a message has been left on your voice messaging system. To retrieve voice mail messages: 1 When your telephone displays Voice Mail, use the keypad to enter the extension used to access your voice messaging system. 2 Press the SND key. The Meridian 1 system connects you to your voice mail system.
Shortcut method If configured by your administrator, your telephone has the ability to access the Meridian 1 features described in this guide using a shortcut method. To access features using the shortcut method: 1 Press the FCT key. 2 Without scrolling, press the keypad key that corresponds to the number that appears next to the feature in the telephone’s list of features. Please use Table 1 to note the number assigned to each of the Meridian 1 features on your telephone.
16
