Passport Module User Guide

68 Chapter 4 Managing the Passport 8672ATM Module with Device Manager
209195-A
Table 13 describes the items in the Insert ATM 1483 ELAN dialog box.
5 In the VlanId field, type the VLAN ID.
6 In the PvcIds field, type the PVC ID.
7 In the ConnectType field, select the type of routing protocol: bridged, ip, or
ipx.
8 If bridged is selected in the ConnectType field, click Insert.
9 If Ip is selected in the ConnectType field, complete the following fields:
a In the LocalIpAddress field, type the IP address of the device.
b In the RemoteIpAddress field, type the IP address of the device that you
are connecting to in the 1483 ELAN.
c Select the InArpSendEnable option to enable Arp packets.
d In the InArpSendInterval field, type the time interval between 0 and 60
seconds.
e Click Insert.
Table 13 Insert ATM 1483 ELAN dialog box items
Item Description
VlanId VLAN ID.
PvcIds Value for Pvc IDs.
ConnectType Types of connection: bridged, IP or IPX.
LocalIpAddress IP address of the device.
RemoteIpAddress IP address of the device to which you are connecting.
InArpSendEnable Enables ARP sending on the ELAN for connection type IP.
InArpSendInterval Interval of ARP sending for connection type IP.
IpxVlanEncapMethod IPX encapsulation protocol: llc, snap, ether-ii, or raw.
IpxNetworkNum Network number; numeric value, within the range
0...2147483647.
Note: For <vpi.vci>, 0.0 is not supported.