Passport Module User Guide

64 Chapter 4 Managing the Passport 8672ATM Module with Device Manager
209195-A
6 In the Vci field, type the VCI-bit size (an integer between 0 and 65, 535).
7 In the Name field, type the name of the ATM PVC.
8 In the Encapsulation field, select the encapsulation method (null or IIcSnap).
9 In the Service Type field, select the service type (ubr or vbr).
10 If you select vbr in the Service Type field:
a In the PeakCellRate field, enter the PCR (an integer between 86 and
733490).
b In the SustainedCellRate field, enter the SCR (an integer between 86 and
733490).
c In the MaxBurstSize, type the maximum burst size (an integer between 2
and 255).
11 Click Insert.
The Insert ATM PVC dialog box closes.
12 Click Close.
Deleting a PVC
To delete a PVC:
1 On the device view, highlight a port.
2 Choose Edit > Port.
The Port dialog box opens with the Interface tab displayed (Figure 12 on
page 52).
3 Click the ATM PVC tab.
4 The ATM PVC tab opens.
5 Click a PvcId entry in the table for the PVC you want to delete.
Figure 19 shows a highlighted PvcId entry.
Note: For <vpi.vci>, 0.0 is not supported.