Passport Module User Guide

138 Chapter 6 Configuring the Passport 8672ATM Module
209195-A
Figure 63 IPX VLAN, Insert dialog box
Table 49 describes the IPX VLAN, Insert dialog box fields.
5 In the NetAddr field, configure the IPX network numbers for the VLAN.
6 In the Encap field, click the encapsulation type.
7 Click Insert.
The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.
8 Click Close.
Enabling IPX forwarding
To enable IPX forwarding on both VLANs:
1 From the Device Manager menu bar, choose IPX Routing > IPX.
The IPX dialog box opens with the Globals tab displayed (Figure 64).
Table 49 IPX VLAN, Insert dialog box fields
Field Description
NetAddr The IP address of this VLAN.
Encap Encapsulation type: ethernetii, snap, llc, or raw.