Passport Module User Guide

Chapter 6 Configuring the Passport 8672ATM Module 131
Using the Passport 8672ATM Module
Enabling RIP routing
1 From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed (Figure 52).
Table 41 on page 120 describes the VLAN Basic tab fields.
2 Click one of the VLANs.
3 Click IP.
The IP, VLAN dialog box opens with the IP Address tab displayed (Figure 57
on page 129).
Table 44 on page 129 describes the IP Address tab fields.
4 Click the RIP tab.
The RIP tab opens (Figure 59).
Figure 59 RIP tab
Table 46 describes the RIP tab fields.
Table 46 RIP tab fields
Field Description
Enable IP address of the VLAN.
Supply Enables or disables RIP supply on the specified interface.