Ethernet Routing Switch Installation Guide

Table Of Contents

Regulatory Information and Safety

Precautions

Read the information in this section to learn about regulatory conformities

and compliances.

International Regulatory Statements of Conformity

This is to certify that the Nortel 8300 Series chassis and components

installed within the chassis were evaluated to the international regulatory

standards for electromagnetic compliance (EMC) and safety and were

found to have met the requirements for the following international

standards:

• EMC - Electromagnetic Emissions – CISPR 22, Class A

•

EMC - Electromagnetic Immunity – CISPR 24

•

Electrical Safety – IEC 60950, with CB member national deviations

Further, the equipment has been certified as compliant with the national

standards as detailed below.

National Electromagnetic Compliance (EMC) Statements of

Compliance

FCC Statement (USA only)

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the Federal Communications

Commission (FCC) rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy. If it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case users will be required to take

whatever measures may be necessary to correct the interference at their

own expense.

Nortel Ethernet Routing Switch 8300

Installation — Chassis

NN46200-309 01.01 Standard

16 June 2008