Ethernet Routing Switch Installation Guide

Table Of Contents
43
.
Switch operations
This chapter describes some of the procedures that you perform to
operate the Ethernet Routing Switch 8300 and provides troubleshooting
information.
Navigation
“Powering on DC power supplies” (page 43)
“Powering on AC power supplies” (page 44)
“Resetting the switch” (page 45)
“Installing removable flash memory cards” (page 46)
“Removing removable flash memory cards” (page 47)
“Protecting memory card files” (page 48)
Powering on DC power supplies
Power on the DC power supplies to provide power to the switch.
Prerequisites
Ensure that the power supply is seated properly.
Procedure steps
Step Action
1 On each DC power supply, turn the power switch to the On
position.
Nortel Ethernet Routing Switch 8300
Installation Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.