Part No.
Analog Telephone User Guide Copyright © 2004 Nortel Networks All rights reserved. 2004. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document.
Analog Telephone User Guide This guide explains how to make and answer calls and how to access features on analog telephones. Features described in this guide are for analog telephones with a LINK or FLASH button. Note: Analog telephones in Europe or Australia will have a RECALL button instead of a LINK or FLASH button. If your telephone does not have a LINK, FLASH or RECALL button, you must use the Hook Switch (located under the handset).
Message Waiting Indication (MWI) Message Waiting Indication (MWI) Depending on the system hardware/software configuration, visual or audible signalling for Message Waiting Indication (MWI) is available for analog telephones. There are two MWI types: Stutter Dial Tone and Lamp Indication. Your system administrator determines which MWI type is assigned to your telephone in system programming. Stutter Dial Tone Lift the handset. You will hear a stuttered dial tone when you have a message waiting.
Feature List 5 Feature List Use this list to review all available features for your telephone. Call Forward LINK •› Cancel: LINK £› Directs your calls to another telephone connected to your system. Press LINK •› followed by the extension number of the telephone to receive the forwarded calls. Call Park LINK •‡› Parks the call on hold and allows it to be retrieved from any other telephone within the system.
Feature List Conference continued To put a conference on hold: Press LINK ¤.The other two callers can still talk to each other. To return to the conference call: Press LINK ¤ again. To split a conference: 1. Press LINK £‹. This allows you to put one caller on hold and to consult with the other caller. 2. Press LINK ¤ to alternate between callers. To re-establish the conference: Press LINK •‹. To disconnect one party: 1. Press LINK £‹. This allows you to put one caller on hold. 2.
Feature List Privacy Control Ring Again 7 LINK •°‹ Prevents another telephone that shares your line from joining your current call or permits another telephone that shares your line to join in. LINK •¤ Cancel: LINK £¤ Allows you to monitor a busy or unanswered telephone, or a busy line pool within your system. When the telephone or line pool becomes available, you are alerted with one short ring from your telephone. Saved Number LINK •fl‡ Redial Allows you to save an external number to redial later.
Other documents Trunk Answer LINK • ° ‚ ‚ Allows you to pick up a ringing external call on a line that has been placed into a Ringing Service schedule. Voice Call LINK • flfl and the extension number Allows you to make a voice announcement or begin a conversation through the speaker on a digital telephone without making the other telephone ring. Voice Messaging Internal LINK • · ° ⁄ and follow the voice prompts Allows you to open your mailbox to listen to your messages.
