Optivity Switch Owner's Manual

Chapter 4 Using VLAN Manager 85
Using Optivity Switch Manager, Release 1.1.0.0
9 Select the device to be configured on the VLAN by doing one of the
following:
• Select from the device list.
• Click On All Devices to select all devices in the list.
10 Click Ok.
Table 26 describes the items in the New VLAN dialog box.
Creating a source IP subnet-based VLAN
Source IP subnet-based VLANs are supported only on Passport 1000 Series and
Passport 8000 Series switches.
To create a source IP subnet-based VLAN:
1 In the navigation pane, select an STG.
2 Do one of the following:
• From the menu bar, choose Edit > Insert.
• On the toolbar, click Insert.
Table 26 New VLAN dialog box items
Item Description
Id A number between 1 and 4,094 that identifies the new VLAN
configured on the network.
Name Name given to the VLAN.
QosLevel For a Passport 8000 Series switch, you can set the Quality of
Service level for traffic in the VLAN to a level between 1 and 8.
DsField For a Passport 8000 Series switch, you can set the Differentiated
Services field for traffic in the VLAN to a level between 1 and 54.
High Priority For a Passport 1000 Series switch, you can select HighPriority
mode for all traffic in the VLAN.
Type Type of VLAN:
• Port-based VLAN
• Source IP subnet-based VLAN
• Protocol-based VLAN
• Source MAC address-based VLAN
On All Devices Selects all devices in the list.