Optivity Switch Owner's Manual

Chapter 4 Using VLAN Manager 83
Using Optivity Switch Manager, Release 1.1.0.0
• An access (untagged) port can belong to one and only one port-based VLAN
or it can belong to one and only one policy-based VLAN for the given
protocol.
• If you enable tagging on a port that is in a VLAN, the spanning tree group
configuration for that port is lost.
• A frame’s VLAN membership is determined by the following order of
precedence:
— VLAN ID
— Source MAC-based VLAN
— IP subnet-based VLAN
— Protocol-based VLAN
— Port-based VLAN
Creating a port-based VLAN
To create a port-based VLAN:
1 In the navigation pane, select an STG.
2 Do one of the following:
• From the menu bar, choose Edit > Insert.
• On the toolbar, click Insert.
The New VLAN dialog box opens (Figure 32).