Optivity Switch Owner's Manual

42 Chapter 2 Using Optivity Switch Manager
208963-B
Loading a saved network topology map
You can reload a saved topology map. If you do not have a specific topology map
saved, the application loads the previously saved topology map. This map is
stored in the default.topo file.
To open a new topology map, you must use the discovery process described in
“Discovering devices on a network” on page 48.
To reload a saved topology map:
1 Do one of the following:
• From the Optivity Switch Manager menu bar, choose File > Open.
• On the keyboard, press [Ctrl]+O.
• On the Optivity Switch Manager toolbar, click Open.
The Open File dialog box opens (Figure 7).
Figure 7 Open File dialog box
2 Select the filename (with a .topo extension) that contains your saved network
topology.
Note: Optivity Switch Manager Release 1.1.0.0 cannot open topology
maps saved in earlier releases.