Optivity Switch Owner's Manual

36 Chapter 2 Using Optivity Switch Manager
208963-B
Using the toolbar buttons
The toolbars for Optivity Switch Manager, VLAN Manager, MultiLink Trunking
Manager, Log Manager, and Multicast Manager are located beneath their
respective menu bars. The toolbar buttons provide quick access to commonly used
commands. When a toolbar button is unavailable for a particular configuration or
submanager, it appears dimmed.
When you point to a button, the name of the button and a description of the
command function are displayed.
Table 5 describes the toolbar buttons for Optivity Switch Manager and the
submanagers.
Table 5 Optivity Switch Manager and submanager toolbar buttons
Button Name Description Application
Open Opens a topology map or log file. Optivity Switch Manager,
Log Manager
Save Saves a topology map or log file. Optivity Switch Manager,
Log Manager.
Print Prints the topology map.
Note: The application does not paginate the
map, that is, break the map printing into
several pages. To print a portion of the map,
ensure that the portion is visible in the window
at the desired zoom level.
Optivity Switch Manager,
VLAN Manager, MultiLink
Trunking Manager,
Multicast Manager, Log
Manager.
Find Allows you to find a device by IP address, a
VLAN by name, an MLT by IP address, or a
multicast group by address. Refer to “Finding
a device in the topology map” on page 44 for
more information.
Optivity Switch Manager,
VLAN Manager, MultiLink
Trunking Manager,
Multicast Manager
View Error Log Displays the Optivity Switch Manager error
log.
Optivity Switch Manager
Discover Network Discovers a seed address in a network. Refer
to “Discovering devices on a network” on
page 48 for more information.
Optivity Switch Manager
Stop Discovery Stops the discovery process.
Note: This button is available only while
discovery is in process.
Optivity Switch Manager