Optivity Switch Owner's Manual

126 Chapter 6 Using Multicast Manager
208963-B
Toolbar
The toolbar includes the same buttons as Optivity Switch Manager and the other
submanagers. For information about the toolbar buttons available in Multicast
Manager, refer to Table 5 on page 36.
Navigation pane
The Multicast Manager navigation pane (Figure 55) is on the left side of the
window. It contains the protocol and group folders in the navigation tree. The first
four branches of the navigation tree list the multicast protocols supported by the
devices. The last branch lists the root of all active multicast groups, with the first
level identifying the source subnets and the second level identifying the
intermediate forwarding nodes.
In the navigation pane, you can select the folder for which you want to view
multicast information, or use the Print command to print the navigation tree.
View Highlight
To p o log y
Highlights the devices running the
multicast protocol within the topology
map in the Optivity Switch Manager
contents pane, and highlights the
multicast forwarding path from the
source subnet.
To view source subnets or forwarding
devices, you must select the IP address
associated with the subnet or device.
Audit Queries the network topology to report
any discrepancies.
Help Online
Support
Opens a Web browser and loads the
Nortel Networks Customer Support Web
page.
About
Multicast
Manager
Displays information about Multicast
Manager.
Table 37 Multicast Manager menus and commands (continued)
Menu Command Shortcut key Purpose