Optivity Switch Owner's Manual

Chapter 5 Using MultiLink Trunking Manager 113
Using Optivity Switch Manager, Release 1.1.0.0
6 Select the MLT type option.
The default is Access.
7 In the VlanIds field, select the VLAN IDs that belong to the MLT port.
8 Click Ok.
Creating a new MLT on a pair of devices
You can configure an MLT between two adjacent devices and MultiLink Trunking
Manager considers port availability, type of port, and current links between both
devices. You cannot configure an MLT on an isolated device.
To create a new MLT between two devices:
1 Select a device from the second level of the MultiLink Trunking Manager
navigation pane.
The Trunk table opens in the contents pane (Figure 47).
Figure 47 Trunk table for a pair of devices
2 Do one of the following:
• From the MultiLink Trunking Manager menu bar, choose Edit > Insert.
• On the MultiLink Trunking Manager toolbar, click Insert.
The Insert MLT dialog box opens (Figure 48).