Secure Router Quick Start Guide

Verifying a successful installation 53

Table 3

Secure Router 4134 LED behavior at power-up

Front panel LEDs Rear panel LEDs Description

SYS Illuminate red, and then green

FAN Illuminate red, and then green

PS0 and PS1 Illuminate green for each

power supply module that is

installed.

SM and MM Illuminate green if Small and

Medium Modules are installed.

The MM LED also monitors a

Large Module, if installed.

Module status and link status

LEDs

Illuminate in various states

until you configure the Secure

Router 4134 for specific

network line conditions.

Generally, the status LEDs on

interface modules illuminate

yellow initially, and then green.

The link status LEDs illuminate

green, but turn off if there is no

link

Ports GE 0/1, GE 0/2, GE 0/3,

and GE 0/4

LEDs illuminate if a link is

present and established.

As a general rule, an LED illuminates green for items that you installed. If the SM and MM LEDs

on the rear panel of the Secure Router 4134 do not illuminate green, refer to the LEDs on the

modules to identify issues.

3. The logon prompt appears on the console screen.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008