Network Router User's Manual

Chapter 5 DIP switch settings 59
Setting Up the BayStack Instant Internet 400-S Unit
3 Turn on your unit.
The LEDs on the front of your unit flash and then glow steadily amber,
including the Power LED, when they completely match the sequence for the
selected switch settings.
4 Turn off your unit.
5 Reset the switches for normal operation.
Normal operation is when all the switches are in the off position. Refer to
“Switch settings for normal operation” on page 56.
6 Turn on your unit.
Note: If you used the switch settings in Table 9 to disable the reset
password and configuration switch settings, the Power LED glows amber
and LEDs 1–8 flash red in the sequence of the selected switch settings.