Server Hardware Installation

November 2006 Preparing for installation
201i Server Hardware Installation 39
6 Set the following:
 SCSI IDs on the CD-ROM and tape drives (see pages
126 and 128)
 DIP switches on the CD-ROM drive (see page 126)
 device termination on the CD-ROM and tape drives (see
page 130)
❒
7 Insert the 201i server into two consecutive slots inside the
switch. For instructions, see:
 large Meridian 1 systems, such as Option 51C (see page
56)
 Option 11C or Option 11C Mini (see page 72)
 Succession 1000 (see page 107)
❒
8 Install the MPC cards, if required (see page 140). ❒
Step Description Check