Server Hardware Installation

About the 201i server Standard 1.07
22 CallPilot
Environmental specifications
Temperatures
Relative humidity
Network and drive
activity LEDs
(labeled as E, C, I, and S)
The E and C LEDs indicate the presence of network
activity for both the ELAN and CLAN interfaces
(respectively). When they are lit, they indicate that the
interfaces are properly attached to their respective
hubs. When the LEDs are blinking, there is network
activity.
When the I and S LEDs are lit, it means that the IDE
hard drive and SCSI device are being accessed.
Reset button The reset hardware was designed for Windows NT and
does not function properly in Windows 2003. Do not
use this button.
Recommended
temperature
15
°C (59°F) to 30°C (86°F)
Absolute temperature 10
°C (50°F) to 45°C (113°F)
Long-term storage
temperature
–20
°C (-4°F) to 60°C (140°F)
Short-term storage
temperature
–40
°C (-40°F) to 70°C (158°F)
(less than 72 hours)
Change rate temperature Less than 1
°C (34°F) per 3 minutes
Recommended relative
humidity (RH)
20% to 55% RH (noncondensing)
Faceplate feature Description