Business Policy Switch User Guide

76
Using the Business Policy Switch 2000 Version 1.2
• You cannot configure EAPOL-based security on ports that are currently
configured for:
— Shared segments
— MultiLink Trunking
— MAC address-based security
— IGMP (Static Router Ports)
— Port mirroring
• You can connect only a single client on each port that is configured for
EAPOL-based security. (If you attempt to add additional ports to a port, that
port goes to Blocking mode.)
EAPOL-based security uses the RADIUS protocol to authenticate local console,
Telnet, and EAPOL-authorized logins. Refer to “RADIUS-based network
security” on page 70 for more information on using the RADIUS protocol.
Flash memory storage
Switch software image storage
The Business Policy Switch uses flash memory to store the switch software
image. The flash memory allows you to update the software image with a newer
version without changing the switch hardware (see Chapter 3). An in-band
connection between the switch and the TFTP load host is required to download the
software image.