Business Policy Switch User Guide

260 Chapter 3 Using the console interface
208700-B
Table 50 describes the Software Download screen fields.
Table 50 Software Download screen fields
Field Description
BPS 2000 Image
Filename
The Business Policy Switch software image load file name.
NOTE: Certain software releases may require you to download two images: the boot
code image and the agent image. For proper operation of the switch, the new boot code
image must be downloaded before the agent image is downloaded.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
BPS 2000
Diagnostics
Filename
The Business Policy Switch diagnostics file name.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
450 Image
Filename
The BayStack 450 software image load file name. Displays in a mixed stack environment.
NOTE: Certain software releases may require you to download two images: the boot
code image and the agent image. For proper operation of the switch, the new boot code
image must be downloaded before the agent image is downloaded.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
TFTP Server IP
Address
The IP address of your TFTP load host.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Start TFTP Load
of New Image
Specifies whether to start the download of the switch software image (default is No).
Use the spacebar to toggle the selection to Yes.
Press [Enter] to initiate the software download process.
NOTE: The software download process can take up to 60 seconds to complete (or more
if the load host path is congested or there is a high volume of network traffic).
To ensure that the download process is not interrupted, do not power down the switch for
approximately 10 minutes.
Default Value No
Range Yes, No