Business Policy Switch User Guide

Chapter 3 Using the console interface 243
Using the Business Policy Switch 2000 Version 1.2
Figure 90 Spanning Tree Group Configuration
Table 45 describes the Spanning Tree Group Configuration parameters.
Table 45 Spanning Tree Group Configuration parameters
Parameter Description
Create STP
Group
Allows you to create a spanning tree group.
Default Value 1
Range 1 to 8
Delete STP
Group
Allows you to delete a spanning tree group.
Default Value Blank
Range 1 to 8; only created STP Groups are available
Spanning Tree Group Configuration
Create STP Group: [ 1 ]
Delete STP Group: [ ]
Bridge Priority: [ 8000 ]
Bridge Hello Time: [ 2 seconds ]
Bridge Max. Age Time: [ 20 seconds ]
Bridge Forward Delay Time: [ 15 seconds ]
Add VLAN Membership: [ 1 ]
Delete VLAN Membership: [ ]
Tagged BPDU on tagged port: [ No ]
STP Group State: [ Active ]
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return
to Main Menu.