Business Policy Switch User Guide

152 Chapter 3 Using the console interface
208700-B
Figure 51 Console interface main menu
Table 10 describes the CI main menu options
Table 10 Console interface Main Menu options
Option Description
IP Configuration/
Setup...
Displays the IP Configuration/Setup screen (see “IP Configuration/Setup screen”
on page 155). This screen allows you to set or modify IP configuration
parameters and to ping other network devices.
SNMP Configuration... Displays the SNMP Configuration screen (see “SNMP Configuration screen” on
page 160). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, enable or disable the
authentication trap and the link Up/down trap, set the IP address of trap
receivers, and set the trap community strings.
System
Characteristics...
Displays the System Characteristics screen (see “System Characteristics
screen” on page 162). This screen allows you to view switch characteristics,
including number of resets, power status, hardware and software version, and
MAC address. This screen also contains three user-configurable fields:
sysContact, sysName, and sysLocation. When the switch is part of a stack
configuration, this screen also displays the base unit identification, the number of
units configured in the stack, and the local unit stack number.
Business Policy Switch 2000 Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Identify Unit Numbers
Renumber Stack Units...
Display Hardware Units...
Spanning Tree Configuration...
TELNET/SNMP/Web Access Configuration...
Software Download...
Configuration File...
Display System Log
Reset
Reset to Default Settings
Command Line Interface
Logout
Use arrow keys to highlight option, press <Return> or <Enter> to select
option.