- Nortel IP Phone Mobile Communication Integration Guide

64 Validate deployment

Procedure steps

Step Action

2 Select Endpoints under the Numbering Plan menu on the left

hand side.

Ensure that you are managing the Active Database.

4 Select the Gateway Endpoints tab.

In the results pane, locate the MCG3100 endpoint ID.

6 Verify that the Call Signaling IP is the IP address of the

MCG3100 gateway.

If the Call Signaling IP field shows Not Registered, then the

MCG3100 gateway is not currently registered. Check your

configuration and try again.

--End--

Validating MCC 3100 for BlackBerry communication

Use this procedure to ensure that you can connect to the MCG 3100

through the BlackBerry Enterprise Server (BES).

Procedure steps

Step Action

On your BlackBerry mobile client, open the BlackBerry Mobile

browser.

2 Navigate to the User Portal of the MCG 3100 server.

If you can view the MCG 3100 User Portal, then you have proper

communication between the client and the MCG 3100 servers.

--End--

Validating MC 3100 and CS 1000 deployment

This procedure tests a number of scenarios, in increasing order of

complexity, to ensure that the configuration of the Mobile Communication

Gateway 3100 (MCG 3100), Mobile Communication Client 3100

(MCC 3100), CS 1000, and Lightweight Directory Access Protocol (LDAP)

server interact correctly.

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009