- Nortel IP Phone Mobile Communication Integration Guide

56 CS 1000 configuration for client support

Example: 100 0 0 29

9 At the KEY prompt, enter 01 HNDO to program the Handoff

feature on key 01 of the device.

--End--

Conﬁguring the TSC steering codes

Perform this procedure if you require TSC steering codes.

Procedure steps

Step Action

1 Connect to your call server.

Press enter.

3 Enter the following command to log in to the system:

LOGI admin2

4 Enter the Level 2 password.

5 Enter the following command:

LD 87

At the REQ prompt, enter NEW

At the CUST prompt, enter the Customer Number, as defined in

LD 15.

8 At the FEAT prompt, enter CDP for the Coordinated Dialing Plan.

At the FEAT prompt, enter UDP for the Universal Dialing Plan.

At the TYPE prompt, enter DSC for the Distant Steering Code.

At the DSC prompt, enter the Distant Steering Code digits, up to

7 digits.

Example: 2200

11 At the FLEN prompt, enter the number of digits that will be

passed to the system.

Example: 9

--End--

Conﬁguring dial plan parameters

The CS 1000 requires different parameters, depending on the type of dial

plan: Universal Dial Plan (UDP) or Coordinated Dial Plan (CDP).

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009