- Nortel IP Phone Mobile Communication Integration Guide

Configuring the Device Handoff key 55

Navigate to the Keys section of the Phone Details page.

•

Key 0 is configured with the SCR DN.

• Key 1 is configured as a HOT_P key containing the mobile

DN.

Enter the required details for Key 0 and Key 1 and click Validate

to perform validation of general properties, features, and keys.

For more information, see the following Job aid.

9 Click Finish.

--End--

Job aid

Parameter Description

KEY 1

Configure to the number that will send all calls the MCG 3100 for that user

whenever the user is called.

The format of the input for Key 1 is: HOT P X YYYYY, where X is the

number of digits in YYYYY.

The expected format of YYYYY is

Conﬁguring the Device Handoff key

Use this procedure to configure the handoff key

Procedure steps

Step Action

Connect to your call server.

2 Press enter.

Enter the following command to log in to the system:

LOGI admin2

4 Enter the Level 2 password.

5 Enter the following command:

LD 11

At the REQ prompt, enter CHG

7 At the TYPE prompt, enter the type of device you are changing.

Example: 2004P2

8 At the TN prompt, enter the TN for the device you are changing.

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009