- Nortel IP Phone Mobile Communication Integration Guide

Adding a User Endpoint 49

The Commit command is issued, and the database is placed into

a Committed state.

--End--

Adding a User Endpoint

Use this procedure to add a user endpoint to the NRS.

Each mobile client instance is represented by a User Endpoint (UE).

Create the UE in the L0 domain that corresponds to the PBX that hosts the

user. A typical UE attribute configuration is as follows:

• User name: user’s Electronic Switched Network (ESN) number (for

example, 3435335)

•

Tandem gateway endpoint name: (do not configure) none

• L0 directory number (DN): a number based on the user’s DN that can

never match in the Coordinated Dialing Plan (CDP) or Universal Dialing

Plan (UDP). This can be the last digit of the mobile prefix + User’s ESN

DN (for example, 53435335).

•

L1 directory number (DN) prefix: (not required) none

• Authentication enabled: Authentication on

•

Authentication password: xxxxxxx

The MCG 3100 registers as a gateway endpoint. As each client logs on,

the MCG 3100 uses the user account on the CS 1000 to validate the

password of the user. Call routing does not use SIP registration.

Procedure steps

Step Action

1 In the NRS Manager Navigator, select Numbering Plans,

Endpoints. The Endpoints Web page opens.

2 Ensure that the Standby database is selected.

3 The Limit results to Domain menu contains configured Service

Domains, L1 Domains and L0 Domains. Select a Service

Domain, a L1 Domain and a L0 Domain from the respective

drop-down lists.

4 Click the User Endpoints button. The Endpoints Web page

displays a list of configured User Endpoints in the Endpoints

pane.

5 Click the Add button. The Add User Endpoint Web page opens.

6 Configure the User Endpoint, using the Job Aid.

7 Click the Save button.

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009