- Nortel IP Phone Mobile Communication Integration Guide

Printing system license limits 43

Conﬁguring ISM requirements

ISM counts are created for each of the Universal Extension subtypes,

according to the following table.

Universal Extension UXTY

ISM

Description

MOBX Mobile Extensions Implemented by this feature

TLSV Telephony Services Microsoft OCS 2007 support

FMCL Converged Mobile Users MC 3100 clients

SIPN Nortel SIP Lines Support for SIP phones made

by or for Nortel

SIP3 Third Party SIP Lines Support for SIP phones not

made for Nortel

Each mobile user consumes a license out of the total FMCL ISM count.

The FMCL ISM count will be decremented and incremented when a UEXT

is configured as an FMCL unit (when UXTY prompt is configured as

FMCL).

Verify that sufficient ISMs are licensed for your system, using LD 22 (REQ

SLT).

Printing system license limits

When REQ is configured to SLT in LD 22, system License limits are

printed. You can update the value of License limits either through sysload

or the Instant Software License feature. You can print the new License

limits through LD 22 after the update is complete.

In the License limits printout, three parameters are printed for each

License

• The first parameter is the License limit

•

The USED parameter is the number of configured units.

•

The LEFT parameter is the difference between the License limit and

the USED value (LEFT = License limit - USED).

Procedure steps

Step Action

1 Connect to your call server.

2 Press enter.

Enter the following command to log in to the system:

LOGI admin2

4 Enter the Level 2 password.

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009