- Nortel IP Phone Mobile Communication Integration Guide

42 CS 1000 licensing

Procedure steps

Step Action

Connect to your call server.

2 Press enter.

3 Enter the following command to log in to the system.

LOGI admin2

4 Enter the Level 2 password.

Enter the following command.

LD 22

At the REQ prompt, enter PRT

7 At the TYPE prompt, enter PKG

From the results, ensure that Packages 414, 412, 398, and 145

are listed.

--End--

Verifying PCA requirements

Use this procedure to verify that the PCA feature is enabled.

Procedure steps

Step Action

Connect to the call server command line.

2 Press enter.

Enter the following command to log in to the system.

LOGI admin2

4 Enter the Level 2 password.

5 Enter the following command.

LD 21

6 At the REQ prompt, enter PRT

7 At the TYPE prompt, enter FTR

8 At the PCA prompt, ensure that it is configured to ON.

If the PCA is not on, it must be turned on.

--End--

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009