- Nortel IP Phone Mobile Communication Integration Guide

MCG 3100 conﬁguration

Install the MCG 3100 as described in Nortel Mobile Communication 3100

Installation and Commissioning (NN42030-300), taking into consideration

the following configuration requirements:

•

When configuring the Gateway Settings:

— The User Prefix for Call Termination field which is related to the

mobile prefix. For more information, see "Mobile prefix" (page 15).

— The Dial-In Service DN field must be configured. The Dial-In

Service DN configured on the MCG 3100 is the digits left over

after the mobile prefix is stripped from the incoming call to the

MCG 3100. As noted in "Mobile prefix" (page 15), all calls to the

MCG3100 from the NRS have this prefix. After stripping off this

prefix, you either have an MCC 3100 user name in the case of a

call extended from the UEXT, or in the other case what is left over

after the mobile prefix is stripped is the service DN.

•

When configuring the Device Configurations, ensure that the Service

Number matches the Dial-In Service DN in the Gateway Settings.

Nortel Mobile Communication 3100

Mobile Communication 3100 and Communication Server 1000 Solution Integration Guide

NN49000-315 02.01 2 October 2009