AC Power Supply Installation Guide

22 Power supply installation
4
Lift the extractor lever to disconnect the power supply from the
backplane connector.
5
Pull the power supply out of the chassis.
6
Install a new power supply (see "Installing the AC power supply"
(page 18)) or install a power filler panel (see "Removing and
installing a power filler panel" (page 17)).
—End—
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301 03.01 Standard
4.0 27 August 2007
Copyright © 2007, Nortel Networks
.