- Nortel Communication Server 1000 IP Softphone 2050 User Guide

Configuring CS 1000 Directory user preferences
109
Area code setup
Use area code setup to organize the display of incoming telephone
numbers. When an incoming call arrives with an area code that matches
one of the three stored area codes, the IP Softphone 2050 reorders the
incoming call number to display the telephone number followed by the
area code (as opposed to the area code followed by the telephone
number).
This reordering also applies to the order of telephone numbers found in
the Callers List.
To configure up to three saved area codes:
1. Click Services.
A list of options appears in the display area.
2. Use the up and down arrows (on either the navigation cluster or on
your PC keyboard) to select Telephone Options > Call Log
Options.
3. Select Area Code Setup.
4. Select 1st Code, 2nd Code, or 3rd Code.
5. Enter the area code you want to use, or edit the existing area code.
The default for area code setup is: no area code specified.
Name display format
You can set the IP Softphone 2050 to display the name of the incoming
calling party in either of the following formats:
• first name, last name
• last name, first name
To set the name display format:
1. Click Services.
A list of options appears in the display area.
2. Use the up and down arrows (on either the navigation cluster or on
your PC keyboard) to select Telephone Options > Name Display
format.