- Nortel Communication Server IP Phone 2007 User Guide

Configuring services on the IP Phone 2007

Configuring Area Code Setup

Using the Area Code Setup menu, a user can save up to three area

codes. After an incoming call arrives with an area code that matches one

of the three stored area codes, the incoming call number is reordered to

display the phone number followed by the area code (as opposed to the

area code followed by the phone number).

This reordering is also performed when you scroll through your Callers

List.

To configure an area code, tap the Services soft key, select Telephone

Options, and select Call Log Option from the menu.

To configure default area codes (three maximum):

1. Press the Up/Down navigation keys to

scroll and to highlight Area Code Setup.

2. Tap the Select soft key.

3. Press the Up/Down navigation keys to

scroll and to highlight one of the

following:

— 1st Code:

— 2nd Code:

— 3rd Code:

4. Tap the Select soft key.

5. Use the dialpad to enter the new area

code at the prompt.